Dyson Airblade V, Hand Dryer with HEPA Filtration

$949.00
SKU:
HU02W-
Weight:
9.00 LBS
Shipping:
Calculated at Checkout
$949.00
Reduce carbon emissions and running costs with the Dyson Airblade V
Create space in your restroom

The Dyson Airblade V takes up less space

Easy to install and maintain, the Airblade V is slim, compact (just 4" deep), and ADA-compliant. 

Engineered to be 30% quieter than its predecessor

30% quieter than the Original Airblade V

The powerful 1000W Dyson digital motor V4 is a third quieter than its predecessor, the original Airblade V. 

Airblade™ technology scrapes away water at 420mph

Airblade™ technology removes water at 420mph

HEPA-filtered air is channeled up the machine by the motor, sending sheets of filtered air through precision apertures at high pressure. Water is scraped from the hands at 420mph.

Dyson digital motor v4

The Dyson digital motor V4

Fast hand drying starts with the reprogrammed Dyson digital motor V4, which uses digital pulse technology to draw up to 5.3 gallons of air per second through the machine.

Dyson HEPA filter

HEPA filtration captures 99.97% of particles

Dyson Airblade™ HEPA filters capture nearly 100% of particles3 before they’re blown onto hands, so hands are dried with cleaner air.

Proven by independent testing

Proven hygienic by independent testing

The impact of drying hands with Dyson Airblade™ hand dryers has been tested in universities and published in international journals.


Dyson Airblade V dries hands in a mere 12 seconds4


The Carbon Trust certifies all Dyson Airblade hand dryers


Dyson Airblade V is the only hand dryer certified by the NSF International Protocol P335


Enjoy a 5-year warranty on your purchase of a Dyson Airblade V

Dyson Airblade V | Dyson Hand Dryer

Perfect for high traffic areas the Dyson Airblade V automatic hand dryer offers a quiet, cost-effective and hygienic alternative. The Dyson Airblade V hand dryer uses two HEPA filters to remove 99.97% of bacteria from the air used to dry hands. Forcing sheets of air out at 420 mph, hands are hygienically dried in just 12 seconds. The environmentally-friendly dryer costs only $43 to run annually, while producing up to 77% less CO2 than other hand dryers.

With a slim and compact profile, the Airblade V can be installed without additional recessing costs, while complying with ADA guidelines. Choose the voltage that works for you. Outstanding in hygiene, the Airblade series were the first hand dryers to be certified by the NSF International, Public Health and Safety Company for Hygienic Commercial Hand Dryers.

Product Highlights:

  • Dries hands in 12 seconds
  • HEPA Filtration captured 99.97% of bacteria
  • Costs 97% less than paper towel
  • Energy efficient
  • Produces 77% less CO2 than other hand dryers
  • Certified Hygienic Commercial Hand Dryer by NSF International
  • Dimensions: 15.5" h x 9.2" l x 3.9" d
  • Weight: 9 lbs

Suggested mounting heights from floor to bottom of dryer:

    • Men 37" (93 cm)
    • Women 35" (91 cm)
    • Children 27" (69 cm)

Learn more about this Dyson Airblade V Hand Dryer:

Dyson Airblade V Hand Dryer Spec Sheet
Dyson Airblade V Hand Dryer Installation Guide
Dyson Airblade HEPA Filter Information

5 Year Parts Warranty

All factory parts of your Dyson hand dryer are warrantied against original defects in materials and workmanship when used in accordance with the owner's manual and installations guide for a period of 5 years from the start of your warranty.

1 Year Limited Labor Warranty

Dyson will carry out all repairs with no labor charge for 1 year from the start of your warranty.

Related Products

1 The environmental impact of electrical appliances and paper towels was measured by Carbon Trust. The calculations were produced using the software Footprint Expert Pro, based on product use over 5 years and using weighted averages of individual countries of use. Dry times for product were evaluated using DTM 769. 2 Average electricity price $0.1/kWh as of July 2021. For calculations visit www.dyson.com/calcs. 3 HEPA filter tested to IEST-RP-CC001.6, by an independent testing laboratory, under prescribed test conditions. 4 Dry time determined using Dyson test method 769 based on NSF P335 using a measurement of 0.1g residual moisture.