DRYFT Cordless Floor Scrubber Complete Kit

DRYFT S-Motion Cordless Floor Scrubber & Dryer

Commercial hard floor cleaning, water-only, in a single forward pass.

Most floor scrubbers clean in a straight line and leave the edges for a mop. The DRYFT S-Motion cordless floor scrubber covers 1.6 meters (5.2 ft) of floor width per forward pass, scrubbing, washing, and drying in one movement as you walk forward. That is 100m² cleaned and dried in under four minutes, 75% less walking than a standard walk-behind, and no wet floor left behind.

Where conventional T-handle machines leave gaps at toilet bases, under partitions, and along perimeter edges, DRYFT’s patented chamfer-edged head reaches into corners, fully around toilet pedestals, and under obstacles as low as 5cm (1.96 in). That is the lowest cleaning head profile of any floor scrubber on the market. No missed areas, and no returning with a mop.

At 7.3 kg (16 lbs) empty, it is a cordless floor scrubber light enough to carry up and down stairs between floors. The quick-change magnetic tank fills under any tap in 22 seconds. The CORE-ion battery runs 75 minutes on smooth floors and 60 minutes on rough, and recharges in an hour. Nine out of ten service tasks, including squeegee swaps, pad changes, and suction motor replacement, are tool-free and self-serviceable, with no technician required.

Water-Only Cleaning on Every Floor Type

DRYFT’s digital motor drives oscillation at 4,200 RPM on high and 3,500 RPM on low. That frequency, not chemicals, breaks down grease, heavy soil, and surface grime. Three cleaning modes (smooth, rough, and boost) cover polished tile, textured commercial vinyl, anti-slip kitchen flooring, and stone without changing pads or adjusting setup. The patented SPYDR Chassis automatically adjusts brush pressure to uneven floor surfaces, maintaining a consistent 5.5 kg of downforce across the cleaning head’s 335 cm² pad surface.

For facilities managing chemical costs, safety data sheet compliance, or cleaning staff with chemical sensitivities, running on water alone is a meaningful operational shift.

Built for the Spaces That Give Other Machines Problems

The places where floors do not get properly cleaned are almost always the same: behind toilets, in cubicle corners, along the grout lines at baseboards, and under low-profile furniture and equipment. DRYFT was designed specifically around those gaps.

The chamfer-edged head shape is patented because it lets the machine clean fully around a toilet pedestal in one pass rather than requiring a secondary mop pass. Integrated glide wheels roll the cleaning head along walls for consistent edge cleaning without operator judgment calls. The 360° forged aluminum ball joint handles tight turns and direction changes that would require repositioning on a standard machine.

For washrooms, commercial kitchens, healthcare corridors, fitness facilities, and retail floors, this is a floor-area coverage problem that DRYFT solves at the machine level rather than at the labor-scheduling level.

What's Included:

• DRYFT Floor Scrubber
• S-Handle
• CORE-ion Battery
• Battery Charger
• Charger Cable
• MAGPlate
• Floor Cleaning Pad

Product Highlights:

• Patented S-Motion Technology: Covers 1.6 m (5.2 ft) of floor width per forward pass — 100m² cleaned and dried in 3.9 minutes
• Water-Only Operation: 4,200 RPM oscillation removes grease and heavy soil without chemical cleaning solution
• Patented Head Shape: Cleans fully around toilet bases, into cubicle corners, and along perimeter edges in one pass
• Lowest Profile on the Market: 50 mm (1.96 in) cleaning head height cleans under partitions, seating, and low-clearance equipment
• CORE-ion Battery: Up to 75-minute runtime on smooth floors; 1-hour recharge time; quick-change design
• 22-Second Tank Refill: 2.5 L magnetic quick-change tank fills under any standard tap; covers 548 m² (5,898 ft²) per fill
• Self-Serviceable Design: 9/10 service tasks are tool-free and user-performed — suction motor, squeegees, PCB, solenoid valve, and pad all field-replaceable
• SPYDR Chassis: Automatically adjusts brush pressure to maintain consistent downforce on uneven surfaces
• Magnetic Cleaning Pad: Color-coded, tool-free magnetic attachment for quick transitions between floor zones
• IPX3 Rated: Water-resistant construction for wet commercial environments
• Made in Sheffield, England: Robust aluminum construction; manufactured by DRYFT World Ltd.