1. Home
  2. Cleaning
  3. American Specialties Partitions Mounted Toilet Paper Dispensers
American Specialties

American Specialties Partitions Mounted Toilet Paper Dispensers

$330.00
American Specialties Partitions Mounted Toilet Paper Dispensers (ASI-0032)
SKU:
ASI-0032
Weight:
6.00 LBS
Shipping:
Calculated at Checkout
$330.00

American Specialties ASI-0032 | Partitions Mounted Tissue Dispenser

Partition Mounted Dual Twin Hide-A-Roll Toilet Paper Dispenser shall hold and dispense four (4) standard or four (4) 5-1/4 inch diameter (Ø133) 1800 sheet tissue rolls and shall have doors, door frames, and dispensing mechanism guide tracks fabricated of 18 gauge type 304 stainless steel alloy 18-8. Cabinet bodies and mounting flanges shall be 22 gauge same grade. All exposed surfaces shall be No 4 satin finish and be protected during shipment with PVC film easily removable after installation. Internal mechanism levers shall be fabricated of molded high-impact resistant plastic for smooth operation. Structural assembly of body and door components shall be of welded construction. Door hinges shall be heavy-duty stainless steel 3/16 inch diameter (Ø4.8) rivets. Doors shall be held closed with tumbler locks keyed alike to other ASI washroom equipment. Cabinet shall include theft and vandal resistant rollers that shall be of molded high-impact resistant plastic with integral molded-in plated steel endpins and four (4) rollers [p/n R-004] shall be supplied.

Operation:

  • Reloading instructions are printed on graphic label inside door.
  • Bottom roll is depleted prior to top roll automatically dropping into lower position for use.
  • Empty rollers can not be removed without key unlocking door.
  • Individual two-roll dispenser is accessible from each side of partition.

Installation

  • Partition cutout required is 11-7/8" W x 12-1/4" H x 1/2" to 2-1/2" Part. Thick
  • Unit is partition mounted using four (4) No 10 self tapping screws (supplied) per side through mounting holes provided through fixed mounting frame and adjustable mounting frame.
  • Mounting flanges adjust to accommodate partition thickness of 1/2" (13mm) minimum to 2-1/2" (64mm) maximum.
  • For compliance with ADA Accessibility Guidelines, top of unit should be installed 29" (737mm) above finished floor.
Material Satin stainless steel
Mounting Type Surface Mounted
Capacity Holds four rolls up to 5-1⁄4" (135 mm) diameter (1800 sheets) toilet paper rolls
Partition Opening 12-1⁄8" x 12-1⁄4" x 1⁄2-2-1⁄2" (308 x 311 x 13-64 mm)
Overall Dimensions 14" x 14-1⁄8" x 10" (356 x 359 x 255 mm)

 

Related Products

Customers Who Purchased This Also Bought