Categories

behars Loading... Please wait...

Current Top Sellers

Zogics Get A Quote
  • Bobrick Channel Frame Mirror with Shelf (B-166)

Bobrick Channel Frame Mirror with Shelf

$86.60
SKU:
B-166
Weight:
30.00 LBS
Shipping:
Calculated at checkout
Quantity:

Product Description

Bobrick B-166 | Channel Frame Mirror with Shelf

Bobrick B-166 Channel Frame Mirror with Shelf is a wonderful addition to any facilities building, hospital or school. The high quality stainless steel frame brings an easy maintenance product with a modern look.

FRAME

Type 430 stainless steel, 1/2" x 1/2" x 3/8" (13 x 13 x 9.5mm) channel 1/4" (6mm) return at rear with bright polished finish. One-piece frame with 90 degree mitered corners. Galvanized steel back has integral horizontal hanging brackets near the top for hanging the mirror and near the bottom to prevent the bottom of the mirror from pulling away from the wall. Locking devices secure mirror to concealed wall hanger. In Screw Locking Design(see figure 2), concealed Phillipshead locking screws securely fasten mirror to wall hanger.

SHELF

18-8 S, type 304, 22-gauge (0.8mm) stainless steel with satin finish. 3/8" (10mm) return edges on front and sides with front edge hemmed for additional safety. Shelf is welded to mirror frame and reinforced by concealed 16-gauge (1.6mm) stainless steel brackets. No exposed rivet-heads, screws, or fasteners of any type appear on frame or shelf.

MIRROR

No. 1 quality, 1/4" (6mm) select float glass: selected for silvering, electrolytically copper-plated by the galvanic process, and guaranteed for 10 years against silver spoilage. Corners are protected by friction-absorbing filler strips; back is protected by full-size, shock-absorbing, water-resistant, nonabrasive, 3/16" (5mm) thick polyethylene padding.

CONCEALED WALL HANGER

20-gauge (9.0mm) galvanized steel. Incorporates lower support member, forming rigid rectangle, which engages lower backplate louvers to keep bottom of mirror against wall.

Manufacturer Part Number 166-1824, 166-1830, 166-1836, 166-2436
Weight 30 lbs
Dimensions 40 x 30 x 8 in
Reflective Surface 1/4" thick plate glass, warranted against silver spoilage for 15 years
Materials Type 430 stainless steel with bright-polished finish
One piece frame with 90 degree mitered corners
Frame screw permits easy replacement of glass
Installation

Mount wall hanger on wall with screws (furnished by manufacturer) at points indicated by an S. For plaster or dry wall construction, provide backing to comply with local building codes, then secure wall hanger with screws furnished. When providing a concealed backing, allow backing to cover minimum range of mounting hole locations shown on drawing. For other wall surfaces, provide fiber plugs or expansion shields for use with screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts. Hang mirror on wall hanger with all four backplate louvers engaged behind horizontal wall hanger members. To do this, mirror must be centered in front of the wall hanger horizontally, pressed flat against the wall approximately 1" (25mm) above final position and then lowered into final position.

Snap Locking Design — Locking devices automatically secure mirror to concealed wall hanger when it is lowered into final position. Locking devices may be unlocked by inserting two flat blade screwdrivers behind each side of mirror near the bottom or under the bottom of the mirror and pulling mirror bottom forward and then up.

Screw locking Design — Lock mirror to wall hanger by tightening Phillips-head locking screws that are concealed in the bottom of frame by points indicated by a T. Mirror may be unlocked from wall hanger by loosening locking screws and lifting mirror off of concealed wall hanger.

  •  
Request a Quote
X

Back to Top

Click the button below to add the Bobrick Channel Frame Mirror with Shelf to your wish list.

X