1. Home
  2. Cleaning
  3. American Specialties Recessed Paper Towel Dispenser and Waste Receptacle
American Specialties

American Specialties Recessed Paper Towel Dispenser and Waste Receptacle

$736.88
American Specialties Recessed Paper Towel Dispenser and Waste Receptacle (ASI-94623)
SKU:
ASI-94623
Weight:
23.00 LBS
Shipping:
Calculated at Checkout

American Specialties ASI-94623 | Paper Towel Dispenser and Waste Receptacle

Profile Collection Recessed Mounted Paper Towel Dispenser and Waste Receptacle Unit shall hold and dispense 475 standard multifold or 350 standard C-fold paper towels and shall have a waste capacity of 2 gallons (7.6liters). Cabinet and door shall be fabricated of alloy 18-8 stainless steel, type 304. Cabinet shall be 20 gauge with a 1 in. (25mm) wide perimeter return to lay flat against wall. Full face door shall be 16 gauge, free of miters, welding or open seams with 15/16 in. (24mm) square horizontal returns to wall and 3/4 in. (19mm) rounded vertical edges. Door shall be attached to the edge of unit with a full length 3/16 in. (5mm) dia. stainless steel multi-staked piano hinge and shall be held closed with two (2) rimless tumbler locks keyed alike to other ASI washroom equipment.

Towel dispensing slot shall have a fully deburred edge for snag-free dispensing and user safety. Waste receptacle shall be fabricated of stainless steel with hemmed edges and a finger-pull for ease of service removal. Structural assembly of body and door components shall be of welded construction. All exposed surfaces shall have No 4 satin finish. Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly. Waste container is emptied manually on cycle determined by maintenance needs.

Installation

  • Rough Wall Opening (RWO) required is 12-3/4′′W x 26-1/2′′H x 4-1/4′′D min (324mm x 673mm x 108mm)
  • Unit is mounted in wall recess using No 10 self tapping screws (by others) through concealed mounting holes provided.
  • For compliance with ADA Accessibility Guidelines, unit should be installed so that towel dispenser slot is 54′′ (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48′′ (1219mm) max. AFF if clear floor forward reach access is only provided.
  • Note that top of RWO is 3/4′′ (19mm) below top of unit.
Material Satin stainless steel
Mounting Type Recessed
Capacity 350 C-fold or 475 multi-fold paper towels
Waste Bin Volume 2 gallons (7.6liters)
Overall Dimensions 14-1/4" x 28" x 4-15/16" (362 x 711 x 125 mm)
Wall Opening 12-3/4" x 26-1/2" x 4-1/4" (324 x 673 x 108 mm)

 

Related Products

Customers Who Purchased This Also Bought