dedicated accountmanager ! $ 2 9 9 + o r d e r s s h i p f a s t & f r e e l o w e r p r i c e ? w e l l b e a t i t . g y m w i p e s s hi p f r e e ! o n e s t o p s h o p

American Specialties C-Fold Paper Towel Dispenser

$165.46
SKU:
ASI-0452
Weight:
20.00 LBS
Shipping:
Calculated at Checkout

American Specialties ASI-0452 | Paper Towel Dispenser 

    • Recessed Paper Towel Dispenser shall hold and dispense 800 standard multi-fold or 600 standard C-fold paper towels.
    • Towel dispenser, door, frame and cabinet shall be fabricated of alloy 18-8 stainless steel, type 304, 22 gauge.
    • All exposed surfaces shall be No 4 satin finish and be protected during shipment with a PVC film easily removable after installation.
    • Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety.
    • Door shall be fabricated in double-pan construction with a fiberboard filler and shall be attached to cabinet at side with a full length 3/16′′ dia. (5mm) stainless steel multi-staked piano hinge and be held closed with a tumbler lock keyed alike to other ASI Washroom Equipment.
    • Face trim shall be 1′′ (25.4mm) wide formed from one piece with no mitres, welding or open seams and have 1/4′′ (6.35mm) square return to wall.
    • Structural assembly of all components shall be of welded construction.
Manufacturer Part Number ASI-0452-9, ASI-0452-R
Material Satin stainless steel
Overall Dimensions 14-1/4" x 28" x 4-1/4" (326 x 711 x 108 mm)
Wall Opening 12-3/4" x 26-1/2" x 4" (324 x 673 x 102 mm)
Suggested Mounting Height 48" (1220 mm) from bottom of unit to floor; Barrier-Free, 32" (810 mm)
Operation Towels are self-feeding until supply is depleted.
Unit may be reloaded with a partial load in-place and will continue to feed properly.
Installation Rough Wall Opening (RWO) required is 12-3/4" W x 26-1/2" H x 4" D minimum (324mm x 673mm x 102mm)
Unit is recessed mounted in wall using No10 screws (by others) through concealed mounting holes provided.
For compliance with ADA Accessibility Guidelines, unit should be installed so that towel dispenser slot is 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) maximum AFF if clear floor forward reach access only is provided.
To comply with CalDAG mounting height, towel dispenser slot should be 40" (1016mm) AFF.
Note that bottom of RWO is 3/4" (19mm) above bottom of unit.

 

Related Products

Customers Also Viewed